Brevini to sell 80% of its Power Transmission and Fluid Power Businesses to Dana Incorporated

Brevini has reached a definitive agreement to sell 80% of its Power Transmission and Fluid Power Businesses to Dana Incorporated The combination of Brevini and Dana Off-Highway will create a formidable player in the market with complementary, advanced technologies   REGGIO EMILIA, Italy, Nov. 18, 2016 – Brevini Group, S.p.A. and Dana Incorporated (NYSE: DAN) have reached a definitive agreement for Dana to purchase 80% of the Power Transmission and Fluid Power businesses of Brevini. The announcement has been officially released today by Dana to the financial community. Dana is a world leader in the supply of highly engineered drivetrain, […]

Read more »

The new HPV 310 proportional directional valve now available from Brevini Australia

The HPV 310 proportional directional valve, rated at 600 lpm and 400 bar, was developed by Brevini Fluid Powerin the second half of 2011, with prototype testing completing successfully in 2013. Released in Europe in 2014, the valves are now available in Australia. The valve can be specified to operate with load sensing or constant pressure variable displacement pumps. The HSE inlet section and the HFLS mid inlet section, for hybrid assembling with the HPV77 or HPV41 valves, includes a pressure relief valve and low pressure pilot port. Being able to operate on mineral hydraulic oil and environmentally friendly oils, […]

Read more »

Brevini Australia Expands Service Capability At Sydney Plant

Looking forward to improve service capability and efficiency, Brevini Australia have installed two new 2-tonne cranes at their head office and plant in Girraween, a suburb of Sydney. Capable of 360Ëš rotation, the new cranes have winches with dual speeds on all axes. The new cranes will improve and streamline service capability at the plant, while also assisting in the general build section. The cranes will support the current A-frame crane, which has to be pushed to access material for lifting. The swing crane is more user-friendly and will require less effort. This gives the plant more varaible cpapability for […]

Read more »

Brevini Australia Exhibits in 2013 With New Conveyor Drive Range On Show

We, at Brevini Australia, will be exhibiting a number of products in our stand (2520). Pride of place is the new POSIRED ADVANCED from Brevini PIV. Developed for the toughest applications, especially those found in mining and bulk material handling, the new conveyor drive range features a great improvement in thermal performance and enhanced mechanical efficiency. The new drive series features a modular thermal system. This includes an axial cooling fan, with higher air flow rates for better gearbox cooling, a high advanced lubrication system with mechanical oil pump and copper plates with active cooling fins. Like many of our […]

Read more »

Brevini International Sales Conference Held in Sydney

Over a two day period (14-15 May, 2013), we hosted a number of visitors from around the world for the Brevini Heavy Duty Mining and Global Customers Conference. This was held at the Park Royal in Parramatta. Sales executives from different Brevini Group companies from around the world attended. This included Europe, the USA, Canada, China, Mexico, Brazil, South Africa, Southeast Asia and New Zealand. The attendees included Renato Brevini, president and CEO of the worldwide Brevini Group and Nazarro Paroli, company director. The conference took the approach of Brevini in a global market. As product use can be similar […]

Read more »

Brevini Australia recently accredited by BSI to ISO9001:2008

Following an extensive review and improvement program covering our management systems through 2012, Brevini Australia has received accreditation to ISO9001:2008 from BSI Group Australia and New Zealand Pty Ltd. The accreditation was achieved in December 2012. Certificate no. FS 589749 dated 10/12/2012 applies. Over several years, Brevini Australia has undergone a programme of review of internal systems and procedures. These efforts have been on-going and may have appeared to have been done on an ad hoc manner. We were first worked to ISO9000 certification in 1999-2000. Since that time, we have always taken the approach that improving internal systems to […]

Read more »

Brevini Australia gets a gong at Australian Bulk Handling Awards night

On 7 November, the seventh annual Australian Bulk Handling Awards, was held last at Doltone House in Sydney. Compered by the lovely Doborah Hutton, with opening remarks given by Charles MacDonald, editor of Australian Bulk Handling Review, 12 categories were decided on during the proceedings. In the category of Excellence in the Application of Gears, Motors or Drives, Brevini Australia won the award. This was for the PIVPosiplan gear units at the Genesis Xerowaste Facility at Eastern Creek, NSW. The project has the largest number of such units in the one location in Australia. Now fully operational, the $300 M […]

Read more »

Brevini Expands Product Offering With The Addition Of Armak Air Motors

Now available from Brevini Australia is the Armak geared drive piston air motor range from Germany, which complements and expands Brevini’s product offering. Brevini Australia can now provide complete high efficiency drive solutions in Pneumatic, Electric or Hydraulic power source. Founded in 2004, Armak has a manufacturing facility in Germany, with production and development in England. They produce geared piston air motors in the 2-20kW, which are distributed in Australia by Brevini. Unlike more conventional motors, in Armak geared piston air motors, the torque is developed by one rotating piston and is transferred to the output shaft via a synchronising […]

Read more »

New Hydraulic Bent Axis Piston Motors Released By Brevini Australia

Released in this year’s AIMEX by Brevini Australia are two hydraulic motors: the new SH7V & SH7VR variable displacement hydraulic motors. The units offer even better value for money and significantly improved performance than the previous H2V model, with very high power density, superior efficiency even at low speeds. Currently used in drilling rigs in Italy, China, USA and Japan, the SH7 108 and 160 are now field proven for use in heavy duty transmission applications. Featuring a displacement ratio of 5:1, there are three displacements available from 75-160 cc/rev, with a continuous pressure of 430 bar and peak of […]

Read more »

New Brevini Power Transmission Group Joint Venture Announced

Brevini Australia managing director, Greg Bunn, announced the formation of a new joint venture company, Leonessa Brevini Yancheng. Co-owned by La Leonessa and Brevini Power Transmission Group, the company is currently constructing a dedicated manufacturing centre in Yangcheng, China. The plant, which is slated to open and start manufacturing in early 2012, will increase the production capacity of La Leonessa slew ring bearings, to concentrate on larger units from 400 mm to 4,000 mm. Brevini Australia has been supplying slew ring bearings from La Leonessa of Italy since 2001 to the Australian market. La Leonessa slew rings easily take axial […]

Read more »