Motors

H1C series

H1CThe H1C series motors are bent axis, axial piston hydraulic units with fixed displacement for open and closed circuits. H1C series motors are available in ISO and SAE versions.

Displacement: from 6.06 to 225.1 cm³/rev [from 0.37 to 13.73 in³/rev]
Flow range: from 61 to 540 l/min [from 16.1 to 142.6 U.S. gpm]
Output speed: up to 5590 rpm (Max)
Pressure range: from 350 to 450 bar (Max) [from 5075 to 6 525 psi (Max)]
Max torque: 1613 Nm [1189 lbf * ft]


H1CR

H1CRH1CR series are a family of fixed displacement motors, bent axis piston designed for operation in open and closed circuit. H1CR series motors have a plug-in flange to be mounted on gear boxes, to fit on track drives and winch applications. A range of flangeable valves, for open and closed circuit is also available.

Displacement: from 30 to 107.5 cm³/rev [from 1.38 to 6.56 in³/rev]
Flow range: from 135 to 322 l/min [from 35.5 to 85 U.S. gpm]
Output speed: up to 5590 rpm (Max)
Pressure range: from 350 to 450 bar (Max) [from 5100 to 6500 psi (Max)]
Max torque: 770 Nm [568 lbf * ft]


SH7V

SH7VSH7V series is a family of variable displacement motors, bent axis piston design for operation in both open and closed circuits. The proven design incorporating the lens shape valve plate, the high quality components and manufacturing techniques give the SH7V series motors the ability to provide up to 430 bar [6235 psi] continuous and 480 bar [6960 psi] peak performances. Fully laboratory tested and field proven, these motors provide maximum efficiency and long life even at very bad filtering conditions. Heavy duty bearings permit high radial and axial loads. Versatile design includes a variety of control and shaft ends that will adapt the SH7V series motors to any application both industrial and mobile.

Displacement: 160.8 cm³/rev [9.81 in³/rev]
Flow range: 500 l/min [132 U.S. gpm]
Output speed: up to 3100 rpm (Max)
Pressure range: 480 bar (Max) [6960 psi (Max)]
Max torque: 1230 Nm [906.5 lbf * ft]


H2V

H2VH2V series are variable displacement bent axis, axial piston motors for operation both in open and closed circuits. The bearing of main shaft allows operation with both high radial and axial loads. Several types of control and flangeable valves are available. H2V series motors meet the requirements of the most demanding types of applications. H2V series motors are available in ISO and SAE versions.

Displacement: from 54.8 to 225.1 cm³/rev [from 3.34 to 13.73 in³/rev]
Flow range: from 214 to 563 l/min [from 56.5 to 148 U.S. gpm]
Output speed: up to 5100 rpm (Max)
Pressure range: from 350 to 450 bar (Max) [from 5075 to 6525 psi (Max)]
Max torque: 1613 Nm [1189 lbf * ft]


H2VR

H2VRH2VR series is a family of variable displacement motors, with bent axis piston design, for operation in open and closed circuit. H2VR series motors are plug-in motors for gearboxes, for combinations such as track drives and winch applications. Flangeable valves, for open and closed circuits are available.

Displacement: from 54.8 to 107.5 cm³/rev [from 3.34 to 6.56 in³/rev]
Flow range: 214 to 344 l/min [from 56.5 to 90.5 U.S. gpm]
Output speed: up to 5100 rpm (Max)
Pressure range: from 350 to 450 bar (Max) [from 5000 to 6500 psi (Max)]
Max torque: 770 Nm [568 lbf * ft]


H4C

H4CH4C series units are a family of fixed displacement axial piston motor, swash plate design, suited for operation in closed circuit. The motors are equipped with built in flushing valve. 75 e 90 cm3/rev [4.58 and 5.48 in3/rev] displacements are available with SAE C - 4 bolts mounting flange.

Displacement: from 74.3 to 89.8 cm³/rev [from 4.58 to 5.48 in³/rev]
Flow range: 225 l/min [59.4 U.S. gpm]
Output speed: up to 3000 rpm (Max)
Pressure range: from 320 to 350 bar (Max) [from 4640 to 5075 psi (Max)]
Max torque: 500 Nm [368.5 lbf * ft]






Manufacturing Companies
Brevini Riduttori PIV Brevini Winches Piv Posiplan Brevini Fluid Power