POSIRED 2 Parallel Shaft and Right Angle Gearboxes
In this product range the demand for a gear program rich in variants but with a minimum number of parts have been fulfilled.
A high degree of standardisation and consistent modularity ensures availability with short delivery time. A large number of standard options with a great variety of versions guarantee optimal adaptation in almost all areas of mechanical and system construction.
An extensive range of accessories increases the adaptation capacity of this gear to various requirements. As a standard, fans, cooling coil, external oil cooler, heating rods, torque supports, engine consoles, sub-constructions and operation monitoring systems are available.
Technical Data:
- Torque (T2max): up to 800.000 Nm
- Transmission Ratio: up to 710 iN
- Power Rating: up to 4.400 kW
POSIRED N Parallel axis Lifting gear with large axle bases
Lifting gears in which the cable drum and driving motor are arranged in parallel require a step-down gear with a correspondingly large axle base. The lifting gear gears in the POSIRED N series are designed for this application and ideally bridge the given distance between the motor and cable drum.
The development of this series was based on widespread experience in crane engineering. The demands of this branch were largely taken into account in this gear concept.
The accessories needed for this application such as elastic clutches, barrel clutches, brakes, substructures, etc. are available and can be supplied with the gear.
Technical Data:
- Torque (T2max): up to 500.000 Nm
- Transmission Ratio: up to 500 iN
POSIRED D Right Angle Gearboxes
This universal and compact gearmotor is based on a modular system with high output torque with a monobloc housing integrating a motor bell housing. A large number of variants are available for each size. The opportunity to mount brake motor makes this gearmotor most suited for traverse movements in cranes or other large mobile applications.
Features Include:
- Horizontal or upright fitting position
- Torque reaction arm integrated in the casing
- 6 frame sizes rated according to a modular system
- Use of standard components from the Posired 2 program
- Advantageous prices due to a low manufacturing proportion
Technical Data:
- Torque (T2max): up to 25.000 Nm
- Transmission Ratio: up to 112 iN
- Power Rating: up to 173 kW
POSIRED TS Double Shaft Gear
Fields of application for this series of gear are rolling mills, profiling plants, crushers, double-shaft mixers, kneaders, compactors and presses. These systems require two contra-rotating drives, such as is provided by the Posired TS gear. The various designs, installation possibilities and optional accessories of the basic range of POSIRED 2 gears can also be used for the double shaft gear POSIRED TS.
Technical Data:
- Torque (T2max): up to 110.000 Nm
- Transmission Ratio: up to 140 iN
- Centre distance (a): up to 656 mm
